One of the issues I found was that the CPU on the raspberry pi compute module has no heat sink and the cooling fan is 6-8” away. I solved a lot of my freezing issues by installing a 20x20x11mm copper heat sink.

The palette usually prints good after a factory reset, however, once it has logged so many pings and pongs (3-4 prints) it seems to suffer from memory shortages and the only way to get mine working again is to do a factory reset which purges the log files. The next firmware update should delete older logs to free up memory on the clearly inadequate module.

Yes, the current P3P hardware will support TPU

If you are looking for ***how to scan from HP printer to computer***, then you have come to the right place. First, set up your printer, install ink cartridges, load paper and install the latest version of the printer driver on the computer. Also, set up your printer on a network and put the document on the glass surface of your scanner. Now, click on the Scan option and select the type of scan. Once done, choose the Scan option again. Once the scanning process gets finished, save the scanned documents.,