Skip to main content

v1.0.1

Major VersionM

by Adalyn Ordono

Parts

No parts specified.

  1. Use a lithium grease or similar synthetic lubricant. Using a syringe or eyedropper tool, apply a small amount of lubricant inside the small eyehole of one linear block along the X axis (Printhead rail), and two linear blocks along the Y axes on the left and right side of the printer.
    • Use a lithium grease or similar synthetic lubricant.

    • Using a syringe or eyedropper tool, apply a small amount of lubricant inside the small eyehole of one linear block along the X axis (Printhead rail), and two linear blocks along the Y axes on the left and right side of the printer.

    • Moving the printhead along the X and Y axes will help spread the lubricant.

    • Full instructions for lubricating linear guideways and ball screws can be found here.

  2. From inside the printer chamber's left and right sides, apply lubricant into the small eyehole on the ball screw assembly. Move bed up and down to distribute lubricant.
    • From inside the printer chamber's left and right sides, apply lubricant into the small eyehole on the ball screw assembly. Move bed up and down to distribute lubricant.

Finish Line

3 other people completed this guide.

Guy Elston

Member since: 11/15/2022

23 Guides authored

Team

Customer Success Member of Customer Success

6 Members

32 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 22

All Time: 116

Contact Mosaic Support Team

© 2023 Mosaic Manufacturing Ltd.