v1.1

Minor Versionm

by Adalyn Ordono

Video Overview

  1. Remove Palette's top lid.
    • Remove Palette's top lid.

    • Remove the 4 thumbscrews from the buffer area and remove the acrylic cover.

  2. Remove the PTFE tube from fasteners and lift the collet before removing the entire buffer tube along with the brass retainer.
    • Remove the PTFE tube from fasteners and lift the collet before removing the entire buffer tube along with the brass retainer.

  3. Install the collet onto the new PTFE tube and then the brass retainer. Place the brass retainer end into the gap by the outgoing drive. Reinstall the collet and slowly re-align the tube into the grooved and fastened areas. Snap the tube back into place, following along the buffer area and towards the scroll wheel. Replace the acrylic cover, thumbscrews, and top lid.
    • Install the collet onto the new PTFE tube and then the brass retainer.

    • Place the brass retainer end into the gap by the outgoing drive. Reinstall the collet and slowly re-align the tube into the grooved and fastened areas. Snap the tube back into place, following along the buffer area and towards the scroll wheel.

    • Replace the acrylic cover, thumbscrews, and top lid.

Finish Line

One other person completed this guide.

Jonny Yeu

Member since: 03/27/2020

8,325 Reputation

6 Guides authored

Team

Customer Success Member of Customer Success

5 Members

24 Guides authored

2 Comments

I need a collet and a brass fitting where do I order them?

Alaterza407@gmail.com - Reply

Hey there, we have them available on our Spare Parts store: mm3d.co/spare-parts

If you’re having any trouble, please contact us at support@mosaicmfg.com

Jonny Yeu -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 14

All Time: 254

Contact Mosaic Support Team

© 2022 Mosaic Manufacturing Ltd.