Devices and Software FAQ
This article will go over common questions about Mosaic devices, compatibility and how they work.
What devices can be connected?
Devices are an all encompassing term for Mosaic products that can be interfaced through online connectivity. When linked to a Canvas account, a dashboard with print progress, logging and printer/Palette controls becomes available under the Devices menu. Compatible devices include:
Canvas Hub (S) and DIY Hubs (OctoPi)
Palette 3 (Pro)
Element and Element HT
Photo below: Device dashboard for linked P3P.
How are printer profiles used?
Printer profiles are considered as separate entities to Mosaic devices, and these are managed through the printer profiles menu.
Changes to printer profiles and the style profiles within them will be saved separately from devices.
When is an Internet connection required?
Creating a setup and managing devices are enabled with an Internet connection. The Internet connection is required for slicing, connecting devices to Canvas, and to control printer and Palette from the Devices page.
Can I still use Octoprint?
If you are using Palette 2, yes. Print progress and controls are available both through Octoprint and the Canvas device dashboard.
For Palette 3, Octoprint is not currently compatible. Printer and Palette controls are available through Canvas once Palette 3 is connected.
Is Klipper compatible?
Yes, Klipper is compatible for Palette 2 in connected mode.
For Palette 3, the printer can be used in accessory mode. Connected mode compatibility is not available at the moment.
How do I use smartloading?
After you finish the calibration print smart-loading will be available. This amount to load is based on the loading offset (length from Palette encoder to printer nozzle) established during that calibration print. Extrude filament 5mm at a time until you see the blue bar appear on Palette’s screen, this will indicate that the filament is loaded before the smart-load can start. Use the smart-load button on Palette to automatically load filament to the nozzle.
Can I still use splicing slowdown?
Yes on Palette 2 and 3 (Pro), you can still use splicing slowdown when printing in connected mode. On Palette 3, this is built into the screen's printer settings, and on Palette 2 this is available on the Palette plugin in Octoprint.
How do I switch from single color to Palette printing?
Using only one color on the model will not generate a transition tower upon preview, and only a G-Code file will be generated.
14 Comments
HI, is there a step by step to slice parts and export it to mainsail?
i have a mosaic palette 2 pro in connected mode. When i slice, i get a mcf.gcode file. i upload it trough Mainsail.
But When i go to start the print, mainsail tells me that it's waiting for completing setup.... while nothing going on with the palette.
The palette is connected as i see the files appering on the screen of the palette.
same thing is happening if i start the print with the palette.
i'm confused
Simon Desjardins - Reply
Hey Simon, since you're using Klipper, I'd recommend following the steps in these articles:
https://github.com/Klipper3d/klipper/pul...
https://github.com/fluidd-core/fluidd/is...
Jonny Yeu -
has anybody had any luck getting a palette 2 to work with a k1 max. i have follower all the steps but it still gets errors. at this point i am just asking to see if anybody has actually gotten it working.. they say it works but nobody has proven it...
mykeone - Reply
Hey mykeone, please send us a message at support@mosaicmfg.com with the issues and errors that you're seeing and we can troubleshoot these problems.
Jonny Yeu -
has anybody actually gotten a k1 max to work with a palette 2. yes there are steps but has anybody seen the setup working. this site says the k1 max works but nobody in the wild can be located with it working.
mykeone - Reply
I'm having problems using palette2s with klipper. using 8 basic commands of PALLETTE_CONNECT, PALETTE_CUT... the device responds to commands and executes them, but remains immobile during the printing phase. the palette2s is connected to a Raspberry pi3 with USB
Cesare De Iaco - Reply
Hey Cesare, I would recommend referring to these pages: https://github.com/Klipper3d/klipper/pul...
https://github.com/fluidd-core/fluidd/is...
Jonny Yeu -
Is there anymore information on how to get the palette 2 connected to klipper. I have followed all the steps in the given link and it is not working but does connect.
mykeone - Reply
i am using a K1 max
mykeone -
Is Klipper compatible?
Yes, Klipper is compatible for Palette 2 in connected mode.
mykeone -
What link are you referring too? Are you using a canvas hub or a raspberry pi?
Peter LAVELLE -
Hello,
i am facing a problem in slicing the multi-material part and cannot able to get two files after it's sliced. As the pallet 2S requires two files for the same.
We are using the Canvas software recently released (available at ***https://canvas3d.io/slicer/dc44a676f8dfa...)
Printer: Ender 3
Pallet: 2S
Thank you
Saiyad - Reply
Hi @ladakhan, it sounds like you are looking to print in accessory mode. While you are working within the project, the top-right panel has the Palette options available. Please check that accessory mode is toggled on, and that the combined model has more than one color used: mm3d.co/calibration-maf-print
Adalyn Ordono -
I can’t or don’t how to set up CANVAS to make a file that is compatible with my Makerbot Replicator+ printers.
Once .makerbot file is downloaded a get a tool path error
Could someone provide details on printer setup for the Makerbot Replicator+
Please
Thanks,
Jarrod
Jarrod Newman - Reply