Introduction
In this guide, you will learn how to:
- Disable web client
- Enable local file transfer
- Delete all local files
- Factory reset
-
-
From Palette's main screen tap Settings > System.
-
-
-
Local Web Client: allows basic control of the Palette 3’s screen via your web browser by accessing <Palette 3 IP address>:5000.
-
To enable/disable this functionality, click Local Web Client > On/Off
-
Local File Transfer: Ability to transfer files to Palette 3 over a local area network
-
To enable/disable this feature, click Local File Transfer > On/Off
-
Delete All Local Files: Click and follow the prompts to delete all logs, print files, camera captures and any other files that are saved in Palette.
-
Factory reset: Click and follow the prompts to return your Palette to factory settings and erase all information stored on the device.
-
If you have any additional questions, please send us a message at support@mosaicmfg.com!
If you have any additional questions, please send us a message at support@mosaicmfg.com!
Cancel: I did not complete this guide.
One other person completed this guide.
2 Comments
It would be nice if it would display the IP address. Also, do you need Local file transfer for printing via Prusaslicer and p2pp
Thanks for the feedback! You wouldn’t need to turn on Local file transfer, here’s the setup PDF: https://github.com/tomvandeneede/p2pp/bl...