Skip to main content

V1.0

Minor Versionm

by Jonny Yeu

  1. Remove Palette's top lid.
    • Remove Palette's top lid.

  2. Remove the Splice Core's thumbscrew and remove the Splice Core. Turn the tab on the Splice Core to pull out the splice tube. Push the old splice tube through the tab. Insert the new splice tube into the tab. Holding the tab, push the new splice tube back into the Splice Core
    • Remove the Splice Core's thumbscrew and remove the Splice Core.

    • Turn the tab on the Splice Core to pull out the splice tube. Push the old splice tube through the tab.

    • Insert the new splice tube into the tab. Holding the tab, push the new splice tube back into the Splice Core

    • Replace the Splice Core and fasten its thumbscrew.

    • Replace the acrylic cover, thumbscrews, and top lid.

  3. On Palette's Menu go to Settings > About > Splice Core > Reset Tube Counter.
    • On Palette's Menu go to Settings > About > Splice Core > Reset Tube Counter.

    • Proceed with the reset to bring the splice count for this tube back to 0.

Finish Line

3 other people completed this guide.

Jonny Yeu

Member since: 03/27/2020

8,277 Reputation

6 Guides authored

Team

Customer Success Member of Customer Success

Community

5 Members

24 Guides authored

2 Comments

Jonny, looking to purchase a splice core for the palette 3 pro. And the small brass piece that’s right that goes right next to it. Also the ptfe tube. Where do I get these items. I need them bad.

Alaterza407@gmail.com - Reply

Hey there, these items are available on our Spare Parts page: mm3d.co/spare-parts

If you experience any issues, please send us an email at support@mosaicmfg.com.

Jonny Yeu -

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 22

All Time: 237

Contact Mosaic Support Team

© 2022 Mosaic Manufacturing Ltd.