Skip to main content

v1.0

Major VersionM

by Adalyn Ordono

Introduction

In this guide, you will learn how to control the following printer functions from Palette 3's screen:

  • Set the nozzle and bed temperature.
  • Move the printer axes and extruder.
  • Turn fans on/off, and adjust fan speed.
  1. Controlling your printer from Palette is only available in connected mode. Instructions on how to switch modes can be found here. Begin by going to Controls > Temperature from the home menu. You can customize the temperatures for both the Extruder and the Print Bed by entering a value
    • Controlling your printer from Palette is only available in connected mode. Instructions on how to switch modes can be found here.

    • Begin by going to Controls > Temperature from the home menu.

    • You can customize the temperatures for both the Extruder and the Print Bed by entering a value

    • Preset Temperature: There are preset temperatures for you to choose from depending on the type of material you're printing eg. PLA, TPU, ABS

    • Custom Temperature: You can also customize temperatures using the Custom button, or adjusting the temperature by using the -/+ symbols

  2. Go to Controls > Printer Tap on the Cursor icon to control the XY and Z axes. Press the Home icons for both the XY and Z to return them to origin.
    • Go to Controls > Printer

    • Tap on the Cursor icon to control the XY and Z axes.

    • Press the Home icons for both the XY and Z to return them to origin.

    • Tap on the Nozzle icon to extrude and retract filament.

    • For both axes and extruder controls, enter the number of steps in millimeters for the desired movement.

  3. Go to Controls > Printer Click on Fan symbol to turn the motors on/off. Use the slider to adjust the fan speed.
    • Go to Controls > Printer

    • Click on Fan symbol to turn the motors on/off.

    • Use the slider to adjust the fan speed.

Conclusion

If you have any additional questions, please send us a message at support@mosaicmfg.com

2 other people completed this guide.

Mosaic Support

Member since: 04/02/2020

155 Guides authored

3 Comments

I usually need to adjust my z-axis offset. How do I adjust manually while printing?

M Hink - Reply

With a Prusa MKS3S should one turn on autoload on the printer?

Drone Professor - Reply

Yes, please turn off Autoload on the printer.

Jonny Yeu -

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 6

All Time: 679

Contact Mosaic Support Team

© 2023 Mosaic Manufacturing Ltd.