Palette 3 (Pro) Splice Tuning Chart

The following baseline values are intended to act as a starting point for splice tuning. These values may require further adjustment based on the tolerance, quality of the materials, and how they have been stored.

Additional splice tuning settings from other Palette users can be found here (thank you to the creator!)

A strong splice should be fairly malleable, and can bend a few times before breaking. With calipers, you should have a strong splice be within -/+0.1mm of 1.75mm.

If the splice is thin or necking, decrease heat and increase cooling, and also increase compression by 1 to 2 (maximum suggested compression would be 3-4).

If the splice is thick or bulging, increase heat and reduce compression by 1 to 2. Please see steps 8 to 9 of our splice tuning guide for more troubleshooting.