Tools
-
-
Please note the orientation of the SD card when inserting into Palette. When you're looking at Palette's screen, the Mosaic Logo should be facing you when inserting into your Palette. Please also check that the lock is off.
-
-
-
We also want to check that the MAF file was processed and transferred correctly. Please re-slice and download the MAF file to your SD card and try to load it to your Palette 2.
-
-
-
To check if this is an SD card issue, please re-format your card and reload the files. Please also check the MAF file on other SD cards.
-
-
-
If you're still not able to read the files properly, we can check the connection of the SD card reader to the electronics tray as a last resort. Please follow these steps to remove Palette's bottom casing and access the electronics board. Unscrew the top electronics board to access the blue ribbon that you see in the picture below.
-
We want to test the connection of this ribbon, so please pull this ribbon up and out, then replace it to see if this helps with the SD card issue.
-
If you have any additional questions, please send us a message at support@mosaicmfg.com.
If you have any additional questions, please send us a message at support@mosaicmfg.com.
Cancel: I did not complete this guide.
2 other people completed this guide.
10 Comments
I have reflashed the firmware multiple times now. Still having the same issue. Each time I turn it on it may or may not read from SD files. Flashing, factory resetting has no impact on the issue. Yesterday for example I turned it on and it read the files, i decided i would try the calibration keychain again. It made it to the second layer, then the palette appeared to have frozen. The extruder pulled filament until the palette hit the buffer indicator, the light came on but it never fed more filament and provided the Buffer error. The filament stripped on the printers extruder gear because palette would not feed any more filament. After this failure, i power cycled the palette, and when i turned it back on it wouldnt read from SD again. I tried a dozen times during the day and nothing. In the evneing I turned it on and to my surprise it read the SD card, so i decided to print. I selected the print - it froze on initializing, a couple hours later i tried again and the print worked. Today - nothing
Great to hear! You’re very welcome, please let us know if you ever run into any further questions.
I received the mainboard yesterday and put it in, turned on the Palette today and seems to be working fine with no issues! Now I can work on getting it calibrated. Thank you for your responses and helping me resolved the issues!
Hey Nick, can you send me an e-mail with you mailing details and unit’s serial number? This may be related to an issue with the Main board, so we can send a replacement.
I followed all of the steps, and did a factory reset. My P2S Pro read the same file from the same card a few days ago and now it will not. I have formatted the card, resliced the files, tested the card on other devices (reads fine). The Palette can tell when no card is present, then it says no files found when it is. I re updated the firmware, dont know what other options I have. This is cool but frustrating, works one day, no changes, doesnt work the next?
