Skip to main content

v1.0

Minor Versionm

by Adalyn Ordono

Introduction

In this guide you will learn how to:

  • Access Palette's filament controls
  • Load/unload & cut filament from Palette's ingoing drive
  • Clear the outgoing drive
  1. Begin by going to Controls > Filament .
    • Begin by going to Controls > Filament .

  2. If an input already has filament loaded, it will be indicated by the green marker. Select the input that you'd like to unload filament from, and then select Unload.
    • If an input already has filament loaded, it will be indicated by the green marker.

    • Select the input that you'd like to unload filament from, and then select Unload.

  3. Inputs without filament loaded will be marked with an empty circle.
    • Inputs without filament loaded will be marked with an empty circle.

    • Tap Load. Once the light for the input is flashing, begin loading filament.

  4. To cut filament, tap on the 3 dots in the corner of the Controls screen. Then tap Cut Filament > Cut
    • To cut filament, tap on the 3 dots in the corner of the Controls screen.

    • Then tap Cut Filament > Cut

  5. Once the filament is cut it can be cleared from the splice core, remove the outgoing tube to pull the filament slowly from the output. To remove the outgoing tube, hold the collet in place and gently pull on the tube. Alternatively, go to Controls > Drive > Outgoing to control the outgoing drive motor to push the remaining filament out.
    • Once the filament is cut it can be cleared from the splice core, remove the outgoing tube to pull the filament slowly from the output.

    • To remove the outgoing tube, hold the collet in place and gently pull on the tube.

    • Alternatively, go to Controls > Drive > Outgoing to control the outgoing drive motor to push the remaining filament out.

Conclusion

If you have any additional questions, please send us a message at support@mosaicmfg.com!

Mosaic Support

Member since: 04/02/2020

1,921 Reputation

132 Guides authored

One Comment

HI.

The menu described in this text is different from the actual menu of PALLETE 3 PRO.

How do I load the filament?

firmware is p3_21.11.26.0

heyseok5 - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 33

All Time: 126

Contact Mosaic Support Team

© 2021 Mosaic Manufacturing Ltd.