Skip to main content

v1.2

Minor Versionm

by Adalyn Ordono

Introduction

Over time it's normal to see some filament dust build up within the channels along the inputs and homing switch area on Palette 3. The dust can be cleared as part of a regular maintenance routine.

Video Overview

  1. Start by removing the thumbscrews holding ingoing drive cover B. Once the thumbscrews are removed, the cover can be pushed upwards to release from the slots, and then lifted away from the unit. The homing switch cover can be removed by pinching the tabs towards each other and lifting.
    • Start by removing the thumbscrews holding ingoing drive cover B. Once the thumbscrews are removed, the cover can be pushed upwards to release from the slots, and then lifted away from the unit.

    • The homing switch cover can be removed by pinching the tabs towards each other and lifting.

  2. Compressed air or a cloth can be used to clear the filament dust from the unit.
    • Compressed air or a cloth can be used to clear the filament dust from the unit.

    • The filament dust that builds up is normal, and just requires cleaning after regular usage.

Conclusion

If you have any additional questions, please send us a message at support@mosaicmfg.com.

One other person completed this guide.

Mosaic Support

Member since: 04/02/2020

155 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 281

Contact Mosaic Support Team

© 2023 Mosaic Manufacturing Ltd.