Pings to low using chroma and prusaslicer

Comments

5 comments

  • Avatar
    Jonny Yeu

    Hi Marc, would you mind sharing some additional information with us?

    • Pictures of your print
    • As many ping/pong values as you've recorded
    • Splice tuning values and pictures of a recent splice
    • Have you run an extruder calibration recently? If so, did you have to adjust anything?

    This additional information should help us determine where the issue is occurring.

    0
    Comment actions Permalink
  • Avatar
    Marc

    Picture of my Last print can i show later. My pongs are all near 100%. My splicetuning is 2 -2 3. Extruder is calibrated well. He Feeds exactly 100mm and here Are the pings. It was my 2nd print after Reset.

    Ping 29

    96.42%


    Ping 28

    97.13%


    Ping 27

    96.91%


    Ping 26

    96.67%


    Ping 25

    96.85%


    Ping 24

    97.17%


    Ping 23

    96.85%


    Ping 22

    96.15%


    Ping 21

    95.04%


    Ping 20

    99.63%


    Ping 19

    99.63%


    Ping 18

    99%


    Ping 17

    98.42%


    Ping 16

    100.06%


    Ping 15

    96.71%


    Ping 14

    96.71%


    Ping 13

    96.56%


    Ping 12

    96.57%


    Ping 11

    96.57%


    Ping 10

    96.57%


    Ping 9

    100.54%


    Ping 8

    100.54%


    Ping 7

    100.54%


    Ping 6

    100.58%


    Ping 5

    100.78%


    Ping 4

    100.76%


    Ping 3

    97.48%


    Ping 2

    100.25%


    Ping 1

    102.83

    0
    Comment actions Permalink
  • Avatar
    Jonny Yeu

    Thanks for sharing. What are your Splice Tuning values? The pings dip during the print, which may be caused by thin splices.

    0
    Comment actions Permalink
  • Avatar
    Marc

    Before i had 2/-3/3 now i changed to 2/-2/2 and it looks better.

    0
    Comment actions Permalink
  • Avatar
    Jonny Yeu

    Great to hear! 

    0
    Comment actions Permalink

Please sign in to leave a comment.