Is it possible to finish a good print with a bad Pallet 2 Calibration?

Comments

3 comments

  • Avatar
    Jonny Yeu

    Hey Keone, glad to hear that you were able to complete calibration! Since it's the first print that you're running, it could just be that your Palette is still learning about your printer, so the print may not be completely perfect. I would recommend running another print in order for your Palette to gather more information about how your printer works: https://www.mosaicmfg.com/blogs/news/palette-2-uses-machine-learning-to-get-better-with-every-print

    0
    Comment actions Permalink
  • Avatar
    Keone

    Thanks for the quick reply... I'll keep trying... 

    Just to be clear though.... Are all color transitions supposed to happen on the purge block???  I ask because I kinda remember hearing something about color transitions during the infill to save filament...

     

     

    Thanks Again

    K

    0
    Comment actions Permalink
  • Avatar
    Jonny Yeu

    You're welcome! Yes, all transitions should occur on the tower to ensure that clean color changes happen in your model. There is an option for infill transitioning in Chroma (http://mm3d.co/infill-transition), but depending on the model, a tower may still need to be used.

    0
    Comment actions Permalink

Please sign in to leave a comment.