CR-10S Pro & Palette 2 Setup

Comments

1 comment

  • Avatar
    Jonny Yeu

    Hi tidel, thanks for your interest in Palette! Great to hear that you've picked up a CR-10S Pro, we've had a few users pair their Palette with various CR-10 models. Here's a video of how we position ours: http://mm3d.co/cr10-setup

    Yes, you would be able to use the Bondtech with this setup. Since your Capricorn tubing is an upgraded tube to connect the CR-10s extruder to the hot end, you would be able to use this with Palette. For the tubing from Palette's outgoing drive to your filament feed, you can find user-made extruder clips for the CR-10 here: https://www.thingiverse.com/MosaicResources/collections/palette-2

    Also, please ensure that you're adding the Bowden tube length to your printer profile: http://mm3d.co/bowden

    The CR-10S Pro will work in both accessory and connected mode, and if you already have a Raspberry Pi with OctoPrint, you can create your own Hub for free using our plugins: http://mm3d.co/canvashub-plugin

    If you decide not to use a Hub, you can follow the instructions here to setup your first print: http://mm3d.co/firstprint

    Please feel free to shoot us an e-mail at support@mosaicmfg.com if you have any other questions and welcome to the 3D printing community! 

Please sign in to leave a comment.