Infill on small color areas using canvas with p2p

Comments

5 comments

  • Avatar
    Joelito Real

    Im not familiar with Canvas but it looks like you have problem with layer height. The only advice I can give your is to try printing 1 color only to verify if its printer settings or Canvas setting.
    I am also printing text and the dots(hole) is normal but the gap between filament is not.

  • Avatar
    Joelito Real

  • Avatar
    Jonny Yeu

    Hey Paul and Joelito, if you're finding these gaps in the lettering, I would recommend increasing your Infill-perimeter overlap within CANVAS:

     

    Increasing this will cause the infill to overlap on the perimeter, helping to reduce gaps on the print. 

  • Avatar
    Paul McMaster

    Hey joelito, I have printed a single color and I does not do the gaps. Also the infill overlap for the rest of the print is good so I'm not sure that is the answer but I will give it a try and report back. It seems like it has to do with the small size of the features somehow

  • Avatar
    Joelito Real

    Hi Paul, since you single color is ok it should not be a printer setting issue. Try Jonny’s reply above. I will try it on Canvas.

Please sign in to leave a comment.