cannot position tower

Comments

4 comments

  • Avatar
    Jim Neill

    On that specific gcode file I have moved the object to a non-centered position and it does line up with where chroma is placing it on the bed.

    0
    Comment actions Permalink
  • Avatar
    Jonny Yeu

    Hey Jim,there's a few settings I would check in Slic3r to help adjust this: https://www.facebook.com/groups/mosaic.users/permalink/300480047255237/

    If you don't have Facebook, I can copy and paste the answer on this thread.

    0
    Comment actions Permalink
  • Avatar
    Jim Neill

    So I've tried all variations of these settings with .25mm layer heights to no avail.  Following these instructions exactly as documented and doing the slices between changes and everything and still have the same problem. I even tried resetting all my extrusion widths to be 0 so they use the default value.  The only reason I was even trying this process over canvas was to get support on build plate only since I didn't see that option in settings. Guess I'll just have to live with the extra support since I can't seem to get my preferred Slicer to work.

    0
    Comment actions Permalink
  • Avatar
    Jonny Yeu

    Hi Jim, are you able to set the layer heights to 0.3mm including the extruder for your supports?

    0
    Comment actions Permalink

Please sign in to leave a comment.