Print with 1.75mm filament on your Lulzbot printer with the 1.75mm Adaptor L from Mosaic Manufacturing!
The 1.75mm Adaptor L allows select 2.85mm Lulzbot printers to print reliably with 1.75mm filament. The adaptor can be installed or removed in less than 20 minutes and does not require any permanent changes or modifications to the printer. Now you can Print with Palette 2 (Pro) and have access to lower cost and a wider variety of 1.75mm filament available on the market.
Filament diameter supported: 1.75mm
Max extruder temperature: 240C
Reversible: Yes (can revert to printing with 2.85mm filament by removing the adaptor)
Bowden tube: Extruded PTFE
Hot-end sleeve: Precision machined PTFE
Clip and Guides: SLS 3D printed Nylon
Compatibility and Version Breakdown
|Compatible Printers||Lulzbot Mini, Mini 2, Taz 4, Taz 5, Taz 6, Pro (Left Nozzle), Workhorse all with either Lulzbot Titan Aero 0.5 Extruder Head or Lulzbot Wade Extruder|
|Included in the Box||Upper 1.75mm PTFE Sleeve|
|Lower 1.75 PTFE Sleeve|
|4mm Deburring Kit|
|Titan Aero 1.75mm PTFE Sleeve L|
|Titan Aero 1.75mm PTFE Sleeve S|
|Hot-End 1.75mm Guide L (Left)|
|Hot-End 1.75mm Guide R (Right)|
|Custom Palette Tube Clip|
|M3 7mm Bolt x2|
|M3 T-Nut x2|
|Mosaic Mfg. Sticker x2|
If you have any additional questions, please send us a message at email@example.com.