First and foremost, thank you! We appreciate your support and can't wait to see what you'll create with your Palette. If this is your first time using Palette 2 (Pro), please read the following articles suggested below.
I am getting started with Palette 2
These are recommended articles for when you're unboxing Palette 2. This will cover firmware updating, printer setup, slicing, how to complete the first print, and tuning your printer profile.
Setup CANVAS Hub or Build Your Own CANVAS Hub (optional)
Tuning Palette and Printer Profile
I'm ready to start multi-color printing
You finished your first print and it looks great! Where do you go from here? If you'd like to print a model that has already been split into multiple parts and is ready for multi-color prints, you can try a small-medium size print from our Thingiverse page. If you have a single-body stl file that you'd like to split into multiple parts, our CANVAS Paint feature allows you to paint directly onto the model and have it automatically prepared for multi-color printing. Lastly, if you're using another slicer besides CANVAS, you can use MeshMixer to separate a single-color print into multiple parts for Palette.
I'm ready to get started with multi-material printing
You have a collection of great looking multi-color prints and are ready to take Palette 2 to the next level. Learn what multi-material combinations are possible with our multi-material guide, how to tune splices so they create a strong bond during printing, and add material profiles in CANVAS.
The following articles will help you understand Palette calibration and how to optimize filament waste.
If you have any additional questions, please send us a message at email@example.com.