Dimensions & Weight:
Palette+™ V1.0 (No Scroll Wheel): 290 x 170 x 140 mm (11.4 x 6.7 x 5.5 in)
Primary Purple Box: 400 x 225 x 265 mm (15.8 x 8.9 x 10.5 in)
Printing Medium:
Printing Technology: Fused Filament Fabrication (FFF)
Filament Material: PLA, PETG, TPU, E3D Scaffold (full list here)
Filament Diameter: 1.75 mm (0.069 in)
Filament Quantity: Max. 4 Filaments
Hot Tool Temperature: 210°C ± 5°C (410°F ± 9°F)
Mechanical:
Casing & Structure: Powder Coated Aluminum
Motors: 1.8 Degree Nema 17 Stepper Motors (1/16th Microstepping)
Cutter Blade: 0.23 mm (0.006 in) Carbon Steel
Software:
Software Application: Mosaic™ Chroma™
Supports:
Windows (7, 8, 10 or higher, 32-bit and 64-bit)
macOS (Mountain Lion/10.8 or newer)
Linux (x64, Tested on Ubuntu 16.04)
Printer Code Compatibility: Multi-filament .gcode, .x3g, .g3drem, .gco, .g, .gx, .hvs, .makerbot (output)
Slicer Compatibility: Cura (15.X.X, 2.X), KISSlicer (1.5+), Simplify3D (3.0, 4.0), Slic3r (1.2.9)
Palette+ Input File: Mosaic SEEM File (.msf)
Inputs:
Scroll Wheel DIN: Filament Monitor
USB: Firmware Updating
DC Power: Power Input For Palette V1.0
SD Card: Loading MSF File
Electrical Requirements:
Power Supply: 120V AC, 60Hz, 1.2A | 12V DC, 6.67A max
Palette+: 12V DC, 5.0A max
Operating Environment:
Room temperature: 16-28°C (60-82°F)
Workspace Condition: Level, Dry Environment
Comments
4 comments
Hi Jonathan,
Could you specify what stepper motor drivers are used for the 4 input filament motors?
Thanks!
K.P.
Hi K.P.,
It would be the four on the CNC shield at the bottom of the elec plate:
Thanks,
I know where they are. The question is if I want to replace a bad one (the fouth) with what do I replace it with? I've already tried 2 different A4988 stepper motor drives shown but none would work! Is it a specific one?
Sorry for the misunderstanding, K.P.! You should be able to replace it with another stepper driver as long as it has the right orientation and pin connection and has a tuning of 750 mV.
Leave a comment
Related articles