Print Speed Control During Splices in mm/sDear Palette Team, is there any chance to limit the print speed control in Canvas Hub also by mm/s rather than a...
Answer to "Print Speed Control During Splices in mm/s"Hello Alina, thank you for your reply. I believe the “normal feed rate” in percentage is fine, because the impacted speeds are defined by the style settings in Canvas and could be different speed settings which would be lowered or increased, e.g. shell speed, support speed, … For the “splice feed rate” it would be got to have a setting which defines the highest speed during a splice, for example 35mm/s: - Any higher speeds will be reduced to 35mm/s in my example, to avoid that the buffer is potentially running out in worst case - Any lower speeds won’t be impacted, e.g. if the top layer is printed with 25mm/s , so that the print quality is as expected. Let me know if you have any further questions. Thanks Oliver