ElmoC

I have my options set to not download zip files, but when slicing a multi-material model in accessory mode, I get a zip...

I got a bad clog in my Palette 2S Pro and need to change the splice tube. I can’t find the ones I got in the past, but...

I have a multi-material model I need to resize before printing and can’t figure out how to do this? Is it possible or is...

Thingiverse had changed the site to not allow downloads if an adblocker is in use. Because of this, I can no longer...

With all my printers running Klipper, I feel I have purchased an $800 paper weight. I have yet to print anything with it and I refuse to downgrade a printer to Marlin just to use the P3P. No Klipper support. No stand-alone Chroma so we are dependent on an internet connection and their servers. Can’t upload proprietary models for slicing since that would be a violation of the licensing. Luckily my P2P and P2 are still working.

I am getting this error now. THIS is why we need stand alone products so we are not dependent on someone else system. Bad enough I have to get an exception on the firewall to get out, but then for your system to not even work makes it worse.

@aordono Picture wouldn’t post with the comment. Try it this way. *** ***

You need to consult the camera’s documentation to find the stream address. Try opening a browser to the cam’s IP address. It might have a sample page giving this information.

A new source for the models need to be provided. Thingiverse is now blocking downloads if you have an AdBlocker.

Fixed: Be sure to enable “Single Extruder Multi Material” option in Printer Settings.

I am getting the error of “No transitions in print”. I am using the latest version of Chroma and have the printer settings as described. What is causing this problem?