The issue is that the USB port is in a mode to only accept usb devices it reads and a display (specifically at least the M5C for the display). Both do not work with solutions that allow for pausing, unless it has been physically verified. It is likely the ability to gcode pause the device would be unrecognized due to it wouldn’t communicate with anything other than specified. The Mosiac line would likely not work unless verified with the manufacturer. My opinion of this is from upon further research with other solutions. This is only my opinion and is not an official answer. Your mileage may vary.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
The issue is that the USB port is in a mode to only accept usb devices it reads and a display (specifically at least the M5C for the display). Both do not work with solutions that allow for pausing, unless it has been physically verified. It is likely the ability to gcode pause the device would be unrecognized due to it wouldn’t communicate with anything other than specified. The Mosiac line would likely not work unless verified with the manufacturer. My opinion of this is from upon further research with other solutions. This is only my opinion and is not an official answer. Your mileage may vary.