You'll need to have the serial port connection with Palette working. On my RPi system, I have the secondary USB port that I can switch to the peripheral mode. It's done by loading the g_serial module (modprobe g_serial or adding g_serial to the list of modules to be loaded on system start). If the gadget serial module is loaded and working, the serial port will likely appear at /dev/ttyGS0.
Edit the klipper systemd unit and pass -T /dev/ttyGS0 to it.
I got annoyed by Accessory mode right from the start, so I made some changes to Klipper and had some success printing in Connected mode!
I want to run some more tests to confirm it though.
And the question to the Mosaic team: what is the correct response from the printer to the O31 command, please? Currently I just echo it back but I'm not sure it's right.
1. Is it possible to use Palette 3 with a printer not listed here and with a different slicer?
2. Is there any page where the exact setup is described (e.g. where the models are uploaded and what is controlled by what)?
3. Is there any chance the splice core can be purchased and used separately? E.g. I'm primarily interested in splicing a new spool automatically when an existing spool runs out.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
You can use this https://github.com/Klipper3d/klipper/pul....
You'll need to have the serial port connection with Palette working. On my RPi system, I have the secondary USB port that I can switch to the peripheral mode. It's done by loading the g_serial module (modprobe g_serial or adding g_serial to the list of modules to be loaded on system start). If the gadget serial module is loaded and working, the serial port will likely appear at /dev/ttyGS0.
Edit the klipper systemd unit and pass -T /dev/ttyGS0 to it.
I got annoyed by Accessory mode right from the start, so I made some changes to Klipper and had some success printing in Connected mode!
I want to run some more tests to confirm it though.
And the question to the Mosaic team: what is the correct response from the printer to the O31 command, please? Currently I just echo it back but I'm not sure it's right.
Hello.
1. Is it possible to use Palette 3 with a printer not listed here and with a different slicer?
2. Is there any page where the exact setup is described (e.g. where the models are uploaded and what is controlled by what)?
3. Is there any chance the splice core can be purchased and used separately? E.g. I'm primarily interested in splicing a new spool automatically when an existing spool runs out.