Voctor Diaz

Really??? I had to buy mine. Also, had trouble finding a supplier that had spare parts, that shipped to PR. The sensors that you use are kind of fragile, so if you put in a filament and have to use any kind of force, it will damage the sensor. Still wondering why the buffer sensor got stuck??? Those sensors are really not the best. Also, you shipped me the Palette 2S, but you can’t ship me parts? No BUENO!!!

It has been kda getting hard now that I design my parts. There seems to be a problem when printing!!! It does something that has the printer pull the filament without the palette feeding out any filament and pulls to the end of the buffer area and brakes the filament beside the weld. Its not doing any splicing during this. why doesn’t it do the ping or pong and continue??? I also have print speed reduced to 85% while doing any splice.

Having problems with TPU, it keeps jamming somewhere between the two extruders (incoming and outgoing) seems that the outgoing extruder is not pulling the filament in time and it jams. Is there a way to strart the outgoing extruder before the filament gets to it and pulls the filament before the incoming extruder starts?