Is there a Fix for the SD card issues I and some others are havingThe SD card reader is not reading the SD card consistently. I have spent 20 hours over the last week and half...
My download does not contain the gcodeI have created a model in canvas from a prior model that was previously a 1 color model. When i slice the model i have no...
Answer to "Palette 2 won't read my SD cards"I have had this issue too. Have followed all of the steps in your troubleshooting guide. Have tried multiple SD cards, can view the MAF files on SD cards on other devices, there are no files/folders on the SD card other than MAF files. I have formatted the cards, have reloaded the palette firmware, have verified the cable was connected (even though palette knows if there is an SD card present or not indicating it has a good connection) I have been able to print from SD before, but its very sporadic. I had over 100 attempts yesterday before the SD card finally read in the palette with no other changes from a previous attempt. It read from SD, printed the colors were not aligned at all. After the bad colored print (I let the print finish), I calibrated the palette, loaded a new MAF file, put the SD card back in and it wont read again, nothing else has changed in the setup. I have had the pallette since 4/22 and have been able to complete only 4 prints even though i’m constantly trying to get the SD card to...
Answer to "My download does not contain the gcode"Thank you for the response, I watched the intro video again and realized I missed the toggle button for accessory mode, that was all I needed for the gcode to be generated in the download.