Jesse Wilderotter

Canvas falls very short at almost everything it does: slicing (multi color or otherwise), attempting to control the...

When starting a print the palette asks you to manually start the inputs being used, rather than just rotating the cam and...

Why do i actually have to go input stuff on the palette screen when you should be able to use the thing entirely from...

as title says. trying to send my first single material print through p3p and canvas every time i just get error 500....

updated firmware over ethernet, wifi wont connect. plugging the printer into the palette restarts marlin as if it...

you need to be able to see the printer while you control it, so the camera and printer control screen need to be the same. Also why isnt the palette screen available on canvas? like to view and control? the same as how you can control the palette 3 from browser why cant you control it from within canvas?

as far as i know this is just another key feature that canvas is lacking and octoprint has. yet another example on how palette 3 is actually a step backwards in the overall capability off the device

and this cant just be embedded on the device page on canvas?

dude canvas actually just sucks eggs

you have to take the panels off and get the filament out by hand.

firmware update v22.04.19.0 fixed the printer connection issue and the wifi password accept problem

cant flip it in the firmware so the bed just goes in the correct dimension?

ok well i set it up again and got wifi to connect after it applied an update when turning it on so idk. im gonna finish a print and try to connect it again

wifi im not so concerned about, yes its both 2.4 and 5ghz no theres no wierd characters, it shows up and i enter the password and I hit the green arrow and it goes to a different screen. Palette has not shown any files via usb, ive tried using the usb cord i was using for octoprint and nothing. I tried a random board i had laying around and got that to connect instantly. It seems like when the firmware reboots on the printer when i hit connect, the palette doesnt wait long enough for the firmware to actually finish booting.

what do i do when it still doesnt connect?