Color swaping for supportsI let canvas choose with Auto for support material and I just watched as is swapped back and forth for a color in support...
Answer to "SnapMaker 2.0 Connection Errors"@hana Can you get this fixed in a firmware update! PLEASE!!!!!! So simple
Answer to "Guide to connect Snapmaker 2.0 A350 to Palette 3 Pro/Canvas"I had the same issue and exchange emails with Mosaic on this. Despite them listing the SM 2.0 as compatible it is not. They know about this and are working on it but doesn’t work This was there response. ….. Unfortunately I don't have a timeline for when this fix will happen, it's something the engineering team is working on but no ETA at this point in time. However we did get this tip from another customer using a Snapmaker printer recently that you can try for yourself to use your Palette in connected mode with the printer: "Have your p3p on and connect mode to the printer with usb.Then on snapmaker you need to first enter development mode from the touchscreen. To do this, go to setting -> about machine, then just press on the screen about 5 times consecutively (just as how to get development mode in standard android). Then there will be two more icons on the main screen. Go to Experiment -> Preference -> Reset all. This option will clear out the on screen settings including calibration values (also the...
Answer to "Guide to connect Snapmaker 2.0 A350 to Palette 3 Pro/Canvas"Hello same issue! Just got the P3 pro. Get to the. Step where it says to connect to the printer and I hook up the usb and get nothing it is as if it doesn’t see the printer. The printer said usb connected but nothing….