It is not the point. Maybe I wasn’t clear enough in my problem. I was able to do the calibration printing. Now I am trying to print from Canvas a new project. I saved in Canvas set-up the following information: material “PLA/default material” and “splice setting” the values 1-2-1 and after the 2-2-2. In Canas under the colour circles, I selected the PLA/default material and I reconfirmed the splice setting 1-2-1 and after2-2-2 and push the save button. Those 2 settings were giving go results when I was testing them directly from the Palette 3 Pro. However when I transmit this new project to the Palette (bicolour 3D benchy) the joints made by the Palette 3 is very poor. As bad as the initial setting 0-0-0 when I opened it for the first time. In conclusion, the setting is well set in Canvas in set-up and in the project. However when I transmuted the project is like the setting is lost and do know follow the project. It is like reset to 0-0-0. How come? I need help. I do not know what else to do to print my...