Stefan

Hi, i need some Support at my 3D model - but they start in the air - so my support structur needs additional support. :D...

Between color borders - I have small gaps trough the print? What settings I have to change in canvas to get rid of the gaps?

After 24h of printing - i´ve a 134 Error with the P3P. So it was close to the finish. How can I cut the current project in...

Download v21.11.25.0 Palette 3 Firmware Releases? Link to the new Firmware doesn’t work!

Hi, yesterday I started a print - I send a picture to a friend so - i see the timestamp. ~01:42 I remember the Display...

I´ve updated the P3P to Firmware: 21.11.18.0 and I updatet the MK3s to 3.10.xxx and run into an issue I didn´t see before....

With my second splice I´ve got an error. So i removed the short, well spliced PLA from the Palette 3 pro - But how could I...

UPDATE: Prusa MK4 in combination with the P3P Hi, I connected the P3P with an USB C Cable and i was able to controll the printer. (move axis, controll the fan, ... ) Now I print a File from the USB Stick (MK4) an i See the temperatur in https://canvas3d.io/ - so the connection is working! Now I'm not sure if I can just "throw" an STL onto the cloned MK3S profile or if I need to adjust something. (except the length from head to nozzle--> Loading Offset (LO) should be 131mm) Is there anything to consider? Because the calibration is completely different than with the mk3s? Should i Copy the Start G-Code from Prusa Slicer to canas3d.io Printer Setting into the copied MK3S Printer!? Prusa Profile Canvas3d.io -> Printer Settings THX 4 support!

I set the Gap Fill down as low as possible. The Gap Fill was 0.4 and I tried it with 0.1 mm this is the smallest you could set. And I still get gaps. :-/ Canvas do a bad job here. I tried to print only one layer of the model (lot of STL Files but everything in one color) and sliced it with prusa slicer. And I had no gaps at all.

the automatically created support structure does not even touch the object to be supported. - so it's useless. I thought it was a display problem in canvas. Now it like printing without support.

I steped back to v3.9.xx with the MK3. Now it doesn´t start printing alone. Filament is loaded - the Printhead goes to 0:0 and then everything stops. The first time i didn´t recognise the MK3 display. I thought it stopped and the print “died”. So I cleaned the p3p and the prusa and restart it. Same result -> then I saw on the screen “Waiting for User”

Everything is connected - but I could not transfer it directly to the P3P? - Any suggestions? There is no button.

Is this also a problem because of the new MK3 firmware? - Both of the “stripes” are under the chin of a sheep. I printed 2 small and one big sheep at once. (for the white i need a longer transition distance to get it clear) First I thought it was an error of the slicer - i zoomed into the 3d Model in Canvas but there was all white. I´m not sure. Or is it a calibration Error? But then it would happend more often, or?

I have something like “missing extrusion paths”!? This gaps I only have when I print with the Prusa MK3S and P3P connected with USB and File sliced in canvas. I had to print several version of the parts - because of the fitting. - an they appear randomly on the parts - not always on the same place. (The six I´ve printed 4 times) When I print it with prusa slicer with out P3P the surface is perfect. Sample Picture - Spareparts for a clock learning game for kids:

I have the same issue. My P3Pro is connected through wire! - In the status (on P3) everything is green and connected. But i could not send it directly from the canvas.

Hi, ich hab einen MMU und jetzt eine Palette 3 Pro. Die ersten Erfolge waren schnell da. ABER es gibt ein paar Probleme. Nicht so “große” wie bei der MMU. -> Pain in the Ass.. hab bei der MMU sehr lange gebraucht einen ordentlichen Druck raus zu bekommen. Aktuell benutze ich den Canvas Slicer der funktioniert bei weitem nicht so gut wie der von Prusa, aber es gibt ja hier ein Plugin P2PP. Das muss ich mir jetzt anschauen. Ich denke damit kann ich sofort besser Ergebnisse erreichen. Ich hab jetzt nur Qualitäts PLA verwendet - mit dem ging es sehr gut. De bisherige Eindruck für mich ist das die Palette 3 einfacher ist. Aber auch hier muss man etwas tüfteln. Da ich die MMU schon verwende hab ich schon einen guten Anschluss am Druckkopf damit muss ich nicht mit dem Klettverschluss teil arbeiten! EDIT1: Die P3 ist unangenehm laut! WIRKLICH LAUT!! - fettes Minus!

Hi! When do you add support to the Prusa mk4?

Please provide some examples with pictures.

What should I do when my splices are too thick (up to 1,9mm - most of the time 1.85mm). Your recomondation is? “opposite is true” - > so… -> Increase the heat, decrease cooling? THX

I have got an Error 130 - the Filament slipped out. :-(

Feature request:

If an Error 130 occur - bring the print head to a safe position - leave the bed temp on level.

At least for 30-60 minutes. The user could fix the filament and press a button on the screen - resume. Heat up the print head - let the user clear the nozzle. And resume the print!

Hi, I dowloaded the Download alternate release alt-21.12.07.0 (For Prusa Mini and Prusa Mk3 v3.10.x) - copied to an usb-stick an start the update process. After 2-3 hours nothing happens. — The scree shows rotating arrow “Applying Update…”

Is it possible to recover the print from an Error? Example a Timeout Error like 130/131 - if I put the Filament back into the postion? That the print could resume.