Skip to main content

V1.2

Minor Versionm

by Frank Rupert Catapang

Introduction

With Chroma V3.1 and newer, you will now have the option of creating files for your Palette 2 (Pro) along with the Palette/Palette+ capabilities offered in the past. This would only be used if you would prefer to use one of our supported slicers (Simplify3D, Cura, KISSlicer, Slic3r) instead of using CANVAS.

Please note: as CANVAS is capable of slicing and creating print files for your Palette and printer, you would not need to use Chroma or another slicer in combination with CANVAS.

Get Chroma here.

  1. In Chroma, select Profiles > Printer Profiles > New Profile.
    • In Chroma, select Profiles > Printer Profiles > New Profile.

    • Once you've selected your printer, you'll need to select your Palette Type.

    • If Palette 2 (S) (Pro) is selected, you'll be able to select if a CANVAS Hub is connected (Connected Mode) or if you're using your Palette without a CANVAS Hub (Accessory Mode).

  2. In Chroma, select Profiles > Printer Profiles > Edit for your printer.
    • In Chroma, select Profiles > Printer Profiles > Edit for your printer.

    • Select the Palette tab.

    • You'll be able to select the Palette Type. If Palette 2 (Pro) is selected, you'll be able to select if a CANVAS Hub is connected (Connected Mode) or if you're using your Palette without a CANVAS Hub (Accessory Mode).

Conclusion

If you have any questions, please contact us at support@mosaicmfg.com.

2 other people completed this guide.

Mosaic Support

Member since: 04/02/2020

1 Reputation

112 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 20

All Time: 107

Send our support team a message

© 2020 Mosaic Manufacturing Ltd.