Introduction
After extended use with Palette+, the blade can dull due to extensive use. This article will help walk you through the process of replacing the cutter blade in your unit.
-
-
To remove the blade, you will need to remove the two highlighted screws.
-
Remove the left screw first as this is the easiest to access. Using a screwdriver or hex key, turn counter-clockwise to remove this screw.
-
-
-
Once the first screw is removed, you'll be able to move the cutter into a position which will allow easier access to the second screw. Remove this screw while pressing against the blade to avoid it from falling.
-
Once removed, install the new blade and re-tighten the screws.
-
If you have any additional questions, please send us a message at support@mosaicmfg.com
If you have any additional questions, please send us a message at support@mosaicmfg.com
