Skip to main content

v1.1

Minor Versionm

by Frank Rupert Catapang

Introduction

After extended use with Palette+, the blade can dull due to extensive use. This article will help walk you through the process of replacing the cutter blade in your unit.

  1. To remove the blade, you will need to remove the two highlighted screws. Remove the left screw first as this is the easiest to access. Using a screwdriver or hex key, turn counter-clockwise to remove this screw.
    • To remove the blade, you will need to remove the two highlighted screws.

    • Remove the left screw first as this is the easiest to access. Using a screwdriver or hex key, turn counter-clockwise to remove this screw.

  2. Once the first screw is removed, you'll be able to move the cutter into a position which will allow easier access to the second screw. Remove this screw while pressing against the blade to avoid it from falling.
    • Once the first screw is removed, you'll be able to move the cutter into a position which will allow easier access to the second screw. Remove this screw while pressing against the blade to avoid it from falling.

    • Once removed, install the new blade and re-tighten the screws.

Conclusion

If you have any additional questions, please send us a message at support@mosaicmfg.com

Mosaic Support

Member since: 04/02/2020

1 Reputation

0 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 13

All Time: 18

Send our support team a message

© 2020 Mosaic Manufacturing Ltd.