Introduction
This article explains how you can make your own custom MSF file, which will randomize the four colours to produce unique models.
-
-
Download and open our Chroma software.
-
Go to Tools > Generate Custom MSF. The next screen will allow you to input a Splice Length (minimum of 80 mm), as well as the Total Length of filament you would like to use.
-
Please visit gCodeViewer to determine the total length of the print. When you enter the total length of filament on Chroma, this value can be overestimated to avoid running out of filament.
-
Once you have put in your values, Chroma will create an MSF file for you to use with your Palette.
-
Please note that Chroma automatically defaults to a 4-colour MSF file when you use this option, but you are able to select the number of colours you would like to use.
-
If you're running into any issues, please feel free to message us at support@mosaicmfg.com.
If you're running into any issues, please feel free to message us at support@mosaicmfg.com.
Cancel: I did not complete this guide.
One other person completed this guide.
