Skip to main content

V1.2

Minor Versionm

by Frank

Introduction

This article explains how you can make your own custom MSF file, which will randomize the four colours to produce unique models.

  1. Download and open our Chroma software.  
    • Download and open our Chroma software.  

    • Go to Tools > Generate Custom MSF. The next screen will allow you to input a Splice Length (minimum of 80 mm), as well as the Total Length of filament you would like to use.

    • Please visit gCodeViewer to determine the total length of the print. When you enter the total length of filament on Chroma, this value can be overestimated to avoid running out of filament.

    • Once you have put in your values, Chroma will create an MSF file for you to use with your Palette.

    • Please note that Chroma automatically defaults to a 4-colour MSF file when you use this option, but you are able to select the number of colours you would like to use.

Conclusion

If you're running into any issues, please feel free to message us at support@mosaicmfg.com.

One other person completed this guide.

Mosaic Support

Member since: 04/02/2020

155 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 166

Contact Mosaic Support Team

© 2023 Mosaic Manufacturing Ltd.