Skip to main content

v1.3

Minor Versionm

by Adalyn Ordono

Introduction

To prepare printing with your Palette, add a Palette profile to your Printer Profile. This can be done when you're setting up the Printer Profile for the first time or can be added after your Printer Profile has been created.

  1. For Palette/Palette+ users, Palette Profiles allow you to assign your calibration values (Loading Offset, Print Value, and Calibration Length) from Chroma to your Printer Profile in CANVAS. You can find these values in Chroma by going to Profiles > Printer Profiles > Edit.  Under the Palette tab, select Re-Calibrate Printer with Palette > I already have values to access this screen.
    • For Palette/Palette+ users, Palette Profiles allow you to assign your calibration values (Loading Offset, Print Value, and Calibration Length) from Chroma to your Printer Profile in CANVAS. You can find these values in Chroma by going to Profiles > Printer Profiles > Edit

    • Under the Palette tab, select Re-Calibrate Printer with Palette > I already have values to access this screen.

    • Transpose this information by first going to the Printer Profiles menu or starting a new project in CANVAS.

    • Select the printer you would like to use with Palette or Palette+.

    • Hover over the printer icon and click Palette.

    • Select whether you're adding Palette or Palette+.

    • Enter your calibration values and click Save.

    • Calibration Length in Chroma is set to metres while this value will need to be converted to millimetres in CANVAS.

  2. Go to the Setups page.
    • Go to the Setups page.

    • Create a New Setup or edit an existing setup with your printer profile.

    • Click the Add Device button.

    • If you are using Palette without CANVAS Hub, please select Accessory.

    • If you will be using Palette with CANVAS Hub, please select Connected.

    • Click Save to complete the setup.

Conclusion

If you have any additional questions, please send us a message at support@mosaicmfg.com.

3 other people completed this guide.

Mosaic Support

Member since: 04/02/2020

1,573 Reputation

129 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 26

All Time: 584

Contact Mosaic Support Team

© 2021 Mosaic Manufacturing Ltd.