Skip to main content

Which printers are compatible with Palette?

Hello,

I have a snapmaker 2 and a Weedo X40 printer. Are both Palette 2 and 3 compatible with these printers? What determines if a printer is compatible with Palette?

Kind regards,

Mattias

Answer this question I have this problem too

Is this a good question?

Score 0

Comments:

Ok, thank you.

How do I connect the Palette 3 with the printer? USB connection?

Do I upload my gcode model to the Palette 3 and is the Palette sending the gcode to the printer via that USB connection?

by

Yes, you would connect Palette 3 to your printer via a USB cable. You can then send the GCode from Canvas (our slicer) to Palette 3 and your printer wirelessly (Palette 3 has Wi-Fi). If you would like to disconnect Palette 3 from internet, you can also transfer the print files via an SD card.

by

Add a comment

1 Answer

Hey @vuego, thanks for your question. In general, Palette 3 is compatible with printers that accept non-proprietary filament 1.75 mm in diameter, do not have an enclosed compartment for the filament spool, and can recognize files sliced in Canvas or PrusaSlicer. 


Palette 2 has the same compatibility requirements, except that you can also use Cura, S3D, and KISSlicer. Let us know if you have any questions about this!

Was this answer helpful?

Score 0

Comments:

Ok, thank you.

How do I connect the Palette 3 with the printer? USB connection?

Do I upload my gcode model to the Palette 3 and is the Palette sending the gcode to the printer via that USB connection?

by

Add a comment

Add your answer

Mattias will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 90

Contact Mosaic Support Team

© 2021 Mosaic Manufacturing Ltd.