Skip to main content
Printing and Calibration

Printing guides and calibration resources for Palette 3

39 Questions View all
Discussion Topic
User avatar

Change the colors when printing is finished

I have made 11 impressions to calibrate the palette3 with Ender 3 S1 connected by USB. I have adjusted the extrusion multiplier, having the best result at 95%, however, the quality of the print is still imperfect because in the last four layers, the colors are inverted.

It should be noted that the first layers come out well calibrated, it only fails in the last ones.

Block Image

Reply to discussion Subscribe to discussion

Is this a worthwhile discussion?

Score 0
Add a comment

1 Reply

User avatar

Hi @garage3d, can you try the following?

  • Increase the transition length under Project Settings > Transition. Please try increasing by 20-30mm, this will do more purge on the tower to get a cleaner result on the part itself.
  • When it gets close to the end, can you share the ping logs? Pings are displayed on the print progress screen, under Tools > Pings. On Canvas, if Palette 3 is connected to WiFi and linked to an account, pings are displayed under the 'Logs' tab on the Status and Controls page of your device: My Devices > Palette > Status and Controls > Logs.

Was this reply helpful?

Score 0
Add a comment

Join the discussion

Author avatar Garage3D will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 29

Contact Mosaic Support Team

© 2023 Mosaic Manufacturing Ltd.