Skip to main content
Discussion Topic

How to config Ender 5 Plus with Direct Drive Boundtech

hello, I have an Ender 5 plus printer modified for Direct Drive with Boundtech extruder. I would like to know how to adapt my Palette 3 Pro to my printer, how I should hold the Clip and how I should measure the distances.

Reply to discussion Subscribe to discussion

Is this a worthwhile discussion?

Score 0
Add a comment

1 Reply

Hi @delfus, great to hear you’re getting started with Palette 3 Pro.

For Direct Drive printers, this tube clip will be positioned directly above the printhead or hot end. The velcro should be positioned near where the filament is inserted, so that the circular part of the clip is directly above that hole. You can see examples of this is on the videos on this page: mm3d.co/p3-connected

The loading offset will be the height of the print head from the top tube clip to the nozzle tip, in millimeters. You can use a ruler to measure this length.

Was this reply helpful?

Score 0
Add a comment

Join the discussion

Francisco will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 16

Past 30 Days: 16

All Time: 16

Contact Mosaic Support Team

© 2022 Mosaic Manufacturing Ltd.