Skip to main content

The world's first multi-material slicer.

73 Questions View all

Skipping to color area's. And coloring no go area's.

Hi,

What am i doing wrong here guys ? The files in canvas looks exactly how i want it. However the final printed result doesn’t look the same.

I have provided a link to the project and have also provided a picture of the final result :

Block Image

https://share.canvas3d.io/projects/19efe...

Regards

Answer this question I have this problem too

Is this a good question?

Score 0

Comments:

@fragile

I could NOT even get a SUCCESSFUL 2 colour print of the Calibration Keychain (CKCM) for 1 MONTH NOW.

by

Here are my issues:

A. Abbreviation:

CV – CANVAS

CVHS - CANVAS Hub S

P2SP - Palette 2S Pro

3DP – 3D-Printer

CKCM – Calibration KeyCchain Model

1. Slice file (gcode) was executed differently and showing different info on CVHS and

P2SP. STILL WHY? WHY? WHY?

2. Hence, I still believe either CVHS or P2SP or BOTH are FAULTY.

3. OR ELSE CV is NOT Slicing properly and does NOT generate CORRECT Slice file

(gcode).

4. I found 3 sets of info were different. STILL WHY? WHY? WHY?:

a. CV

b. P2SP

c. CVHS

5. P2SP – Finished Print EARLIER in BOTH PRINTS ( ISSUE: Finished print more than

20 minutes earlier than CVHS & 3DP)

6. CVHS & 3DP – continued to print, Finished Print (ISSUE: P2SP stopped feeding

filament to 3DP since P2SP has finished)

7. Check CKCM print - TOP (ISSUE: TOP part of the CKCM print was MISSING)

8. Check CKCM print - BOTTOM (ISSUE: Colour MISALIGNED)

by

At the moment I am still trying to answer Mosaic Support requests to print their CKCM BUT ALL FAILED!

Should it be that DIFFICULT to get ALL their GEARS to work together and print their CKCM FULLY & SUCCESSFULLY?

ALL THE GEARS except the 3DP are Mosaic PRODUCTS including the CKCM & SLICING SOFTWARE!

The WORST part is that the ENTIRE Print Process (Model > Colouring > Slicing > Slice File Transfer > Colour Control > Print Control) is UNCONTROLLABLE, UNPREDICTABLE, UNACCEPTABLE ......

despite of ALL COMPONENTS (except the 3D Printer) are Mosaic PRODUCTS.

I HAVE NOT STARTED TO PRINT ANYTHING OF MY OWN YET!

by

I am EXTREMELY disappointed on ALL the EXPENSIVE Mosaic products and Mosaic Support so far.

They certainly do NOT perform up to the STANDARD or their CLAIMS.

There is NO PRODUCTIVE advice from Mosaic Support so far which HELPS.

There is NO IMPROVEMENT on my 3D-Print so far, in fact, it is TOTALLY HALTED.

by

You can also email me on tang8555@gmail.com. Thx.

by

Add a comment

1 Answer

Hey @fragile, thanks for reaching out about this. It looks like the print may have gone out of calibration. Do you have a photo of the transition tower, and the ping data for this print? If you are in accessory mode (no Hub), instructions to access ping data can be found here, and if you are in connected mode (with Hub), instructions to access ping data can be found here. Thanks!

Was this answer helpful?

Score 0
Add a comment

Add your answer

Ashley will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 41

Send our support team a message

© 2020 Mosaic Manufacturing Ltd.