Skip to main content
Discussion Topic

Question regarding FlashForge printer(s) compatibility

I have two 3D printers:

Flashforge Adventurer 3 V2

Flashforce Creator 3 V2 (IDEX)

Any reports of either of these machines working with Palette 3 Pro?

Reply to discussion Subscribe to discussion

Is this a worthwhile discussion?

Score 0
Add a comment

1 Reply

Most Helpful Answer

Hi Ryan, I’ve had a look at the specs for those printers and from what I can see they seem to be compatible with Palette!

Palette has 3 requirements for compatibility: accepts non-proprietary filament which is 1.75 mm in diameter, recognizes files sliced in Slic3r/PrusaSlicer or CANVAS, and has open access to filament feed.

Was this reply helpful?

Score 1


I will likely download CANVAS and use that for some test prints with both printers. I am also curious if it is more full featured than FlashPrint 5.

That should be a good indicator. I was mostly curious about the Creator 3, as it has IDEX, and how Palette would work on one print head, and if I could use Palette 3 Pro and both IDEX's.

Thank-you for your follow-up reply.


@jumpingryan Canvas is a web-based only slicer, P2PP: is a standalone slicer you can download and familiarize yourself with if offline use is required.


Add a comment

Join the discussion

Ryan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 27

All Time: 235

Contact Mosaic Support Team

© 2022 Mosaic Manufacturing Ltd.