Hi,
yesterday I started a print - I send a picture to a friend so - i see the timestamp. ~01:42
I remember the Display show me at the start something around 7h 40 minutes remaining.
Now, more the 7,5 hours later the Display show me 7h more to go. ???
The estimated Time is way off.
Latest P3P Firmware: v21.11.18.0
The Quality looks good at the moment. At least 7hours to go (or more who knows?!)
Is this a good question?
Hey Stefan! Thanks for bringing this to our attention. Our team is currently working on a firmware update that will allow for a more accurate estimate of time remaining in your print.
Was this answer helpful?
Seems to be a lot of updates coming in this future firmware update......lots of promises happening.
It´s normal - like Windows OS or a Tesla. You get a "working" product - and during the "beta testing" - after you bought it - it will improve over time.
But print turn out nice. The purge Block was huge. I´ve to investigate what I could change in Canvas to reduce the waste.
I have a similar problem, but with the time displayed by the printer
(Raise3D Pro2).
During the bed heat up, the remaining time is first displayed as 999:99 h, then drops to 0:00, then jumps to a roughly x2 the remaining time displayed on the Palette.
Then, slowly, both converge.
It is not a real issue in my case, since the remaining time displayed on the Palette is reasonably accurate.
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 2
All Time: 148
