Skip to main content
Help

Current version by: Bronek ,

Text:

After many weeks of grief this is what solved my problems with 95a TPU.
-1) Remove the whole printer core cartridge from the Palette 2s.
+1) Remove the whole splice core cartridge from the Palette 2s.
-2) Manually push a sample off the filament you plan to print with thru the print core and make sure it slides thru VERY easily.
+2) Manually push a sample off the filament you plan to print with thru the splice core and make sure it slides thru VERY easily.
-3) Reinstall the print core
+3) Reinstall the splice core
So far no problems for over 550 splices. Found that for filament over 1.77 diameter there was resistance and this would lead to misc jams and 121 errors.

Status:

open

Original post by: Bronek ,

Text:

After many weeks of grief this is what solved my problems with 95a TPU.

1) Remove the whole printer core cartridge from the Palette 2s.

2) Manually push a sample off the filament you plan to print with thru the print core and make sure it slides thru VERY easily.

3) Reinstall the print core

So far no problems for over 550 splices.  Found that for filament over 1.77 diameter there was resistance and this would lead to misc jams and 121 errors.

Status:

open

Contact Mosaic Support Team

© 2021 Mosaic Manufacturing Ltd.