Skip to main content
Help

Current version by: bastié jérémie ,

Title:

Starting over from the beginning

Text:

Hello, I've been fighting with Palette PRO 2S for a year now. impossible to have reliability, I throw more than 10kg of loading filament.

I decided to start again after my move. So I reset my canvas hub to 0, my palette to 0, reviewed the wall installation properly etc. I do the calibration. I connect everything, I start, the filaments load, I validate the start and there, disaster, the home in X is not done, it is done in the middle, the home in Z the BL touch doesn’t even enter not in contact with the plate and the printing starts in the space ....

if I cunning I manage to make it start correctly but i need make free the steppers from the printer and I push them home by hand.

I specify, I have about 20 printers, they work perfectly on SD card ... 3D printing it’s more than hobby, the problem probably comes from the canvas hub configuration level but I can't find it. So I ask you for help please. i hope buy palette 3 but if i can’t work with the palette 2, i think don’t buy the 3.

Category:

training

Discussion Topic:

No

Status:

open

Accepted Answer:

-1225

Edit by: bastié jérémie ,

Title:

Starting over from the beginning

Text:

Hello, I've been fighting with Palette PRO 2S for a year now. impossible to have reliability, I throw more than 10kg of loading filament.

I decided to start again after my move. So I reset my canvas hub to 0, my palette to 0, reviewed the wall installation properly etc. I do the calibration. I connect everything, I start, the filaments load, I validate the start and there, disaster, the home in X is not done, it is done in the middle, the home in Z the BL touch doesn’t even enter not in contact with the plate and the printing starts in the space ....

if I cunning I manage to make it start correctly but i need make free the steppers from the printer and I push them home by hand.

I specify, I have about 20 printers, they work perfectly on SD card ... 3D printing it’s more than hobby, the problem probably comes from the canvas hub configuration level but I can't find it. So I ask you for help please. i hope buy palette 3 but if i can’t work with the palette 2, i think don’t buy the 3.

Category:

training

Discussion Topic:

No

Status:

open

Accepted Answer:

+1225

Original post by: bastié jérémie ,

Title:

Starting over from the beginning

Text:

Hello, I've been fighting with Palette PRO 2S for a year now. impossible to have reliability, I throw more than 10kg of loading filament.

I decided to start again after my move. So I reset my canvas hub to 0, my palette to 0, reviewed the wall installation properly etc. I do the calibration. I connect everything, I start, the filaments load, I validate the start and there, disaster, the home in X is not done, it is done in the middle, the home in Z the BL touch doesn’t even enter not in contact with the plate and the printing starts in the space ....

if I cunning I manage to make it start correctly but i need make free the steppers from the printer and I push them home by hand.

I specify, I have about 20 printers, they work perfectly on SD card ... 3D printing it’s more than hobby, the problem probably comes from the canvas hub configuration level but I can't find it. So I ask you for help please. i hope buy palette 3 but if i can’t work with the palette 2, i think don’t buy the 3.

Category:

training

Discussion Topic:

No

Status:

open

Contact Mosaic Support Team

© 2021 Mosaic Manufacturing Ltd.